Vai al contenuto

A StayCraft demo. Not real.

All designs

Launching 18 Dec 2026

Dhoop, without the smoke.

A brass lantern that warms herbal cones below burning, so the scent lasts three times as long and leaves no ash. Launching on Kickstarter.

  • No flame, no ash
  • Cast brass, made in India
  • Two-year warranty

Early-bird ₹4,900 for the first 300 · No spam: one email at launch.

The Lantern

Why we made it

The cone, kept, and the smoke, gone

longer the scent lasts than burning the cone Our tests, 2026, 60 cones
3×
open flames in the house
0
homes tested the prototypes
400+
of cast brass in every Lantern
780 g

How it works

Warm, not burn

A ceramic plate warms the cone to just below burning. The herbs release their scent slowly, for about an hour a cone.

  1. 01

    Set a cone on the plate

    Any of our cones, or your own dhoop.

  2. 02

    Turn the dial

    Three heats: a whisper, the room, the whole house.

  3. 03

    The scent, for an hour

    No flame and no ash. Empty the plate when it cools.

Inside

Every part, made to last

  1. 1Brass lidLets the scent out, keeps fingers off
  2. 2Ceramic plateWarms the cone below burning
  3. 3Three-heat dialClicks into place
  4. 4Cast-brass baseHeavy, stays put

What it does

Small things, done properly

  • No flame, no ash

    The cone is warmed, never lit. Nothing to sweep up.

  • Lasts three times as long

    A cone gives its scent for about an hour.

  • Your own dhoop

    Our cones, or the ones you already love.

  • Cast brass

    Made with a family foundry in Moradabad.

  • Two-year warranty

    Repaired or replaced, posted both ways.

What is in a cone

Four herbs, and an hour of scent

Our cones are made with a family in Kangra from four herbs, pressed by hand and dried in the shade. We tested how long each lasts on the Lantern against burning it.

What is in it

  • Deodar Cedrus deodara
  • Juniper Juniperus communis
  • Guggul Commiphora wightii
  • Sandalwood Santalum album

How it is used

  1. One cone on the plate
  2. The dial on the middle heat
  3. About an hour of scent, then empty the plate when it cools

What the study found

  • About an hour a cone

    Warmed on the Lantern, a cone gave its scent for 55 to 70 minutes; burnt, for about 20.

    Study: Our tests, 2026, 60 cones

Our own tests in the workshop, not an independent lab's.

How it compares

The Lantern, beside a burning cone

A burning cone The Lantern
Flame Open, on the shelf None
Ash and soot On the floor and the ceiling None
How long a cone lasts About 20 minutes About an hour
How strong All at once Three settings

Back it early

Kickstarter tiers

  • Tier 01

    First 300

    Early bird

    ₹4,900 ₹6,900

    • One Lantern
    • 60 herbal cones
    • Two-year warranty
    Run
    Limited to 300
    Ships
    March 2027
    Get notified
  • Tier 02

    Kickstarter special

    ₹5,500 ₹6,900

    • One Lantern
    • 60 herbal cones
    Ships
    April 2027
    Get notified
  • Tier 03

    A pair

    ₹9,900 ₹13,800

    • Two Lanterns
    • 180 herbal cones
    • Gift-boxed
    Run
    Limited to 150
    Ships
    April 2027
    Get notified

Reserve yours

A ₹990 deposit holds one; the rest on delivery

  1. 01

    The Lantern

    Solid brass, a ceramic warming plate and a dial. Warms a herbal cone without a flame, so the scent lasts three times as long and leaves no ash.

    Made of
    Solid brass body, ceramic warming plate
    Where it comes from
    Cast in Moradabad, assembled in Dharamshala
    Dimensioni
    14 cm tall, 11 cm across

    ₹6,900 300 left

    Reserve Read the full monograph
  2. 02

    Herbal cones, 60

    Sixty cones of juniper, cedar and sandal, made for the Lantern's plate: no charcoal, no fragrance oil.

    Ingredients
    Juniper, Himalayan cedar, sandalwood, ghee
    Storage
    Dry and airtight
    Best before
    Two years
    • 60 cones
    • 180 cones · Best value

Recognition

Shown, judged, written about

  • Awards · 2026

    Design prize, product category

    Himachal Startup Network

    ₹50,000

  • Shown at the Norbulingka crafts week Open the photo larger

    Shown to · 2026

    Shown at the Norbulingka crafts week

    Sidhpur, Dharamshala

  • In the press · 2026

    A Lantern on every altar?

    A regional daily, the weekend pages

Tested

Before it reaches you

  • Surface temperature tested

    Independent lab, Chandigarh

  • Design registered

    Indian design application filed

  • Two-year warranty

    Repaired or replaced

Road to delivery

Where the Lantern is

  1. 2024–25

    Three prototypes

  2. Jun 2026

    Foundry tooling

    Moradabad

  3. 3

    Nov 2026 · next

    Safety testing

    Independent lab

  4. 4

    Dec 2026

    Kickstarter launch

  5. 5

    Mar 2027

    Early birds ship

Risks and challenges

The foundry is our biggest dependency. We have cast 200 bodies with them already and agreed a second foundry in Moradabad if the first falls behind.

If the safety tests ask for a change to the plate, we will make it before we ship, and tell every backer what changed and why.

What people say

From the homes that tested it

We ran a prototype in the prayer room for three months. The cedar fills the hall and the walls stayed white.
Tenzin Dolma Guesthouse owner, McLeod Ganj
“The dial has the feel of a good camera. It is the first incense thing I have owned that looks designed.”
Arjun Mehta Product designer, Bengaluru
“My mother keeps dhoop every evening. No more ash on the altar cloth.”
Leela Katoch Beta tester, Palampur

The team

Two of us, and a foundry

  • Design

    Rhea Sood

    Industrial designer; drew the Lantern on a hostel napkin in 2023.

  • Engineering

    Kabir Sood

    Built the first warming plate from a coffee warmer.

  • Casting

    The Ansari foundry

    Three generations of brass.

Supported by

  • Himachal Startup Network 2026
  • Kangra Makers Guild Member

What buyers say

★★★★★

“A beta tester: the whole flat smells of cedar and there is no grey film on the shelf any more.”
Ishita P. · Bengaluru

★★★★★

Brought one home from Dharamshala. Beautifully made; the dial clicks like a good watch.
Marcus L. · Berlin

★★★★☆

Takes a few minutes to warm up, then it is lovely. I would like a timer.
Ananya R. · Pune

Questions

When does it launch, and where?

On Kickstarter, on the date counting down above. Join the waiting list and we write to you once, when it opens.

Is anything inhaled, or burnt?

No flame and no smoke to breathe: the plate warms the cone below burning, so it releases its scent slowly.

When will it ship?

Early-bird Lanterns ship in March 2027; the road to delivery below shows where we are.

Can I buy one now instead?

Yes: reserve one here with a ₹990 deposit and pay the rest on delivery.

Be first

Get the early-bird price

Early-bird ₹4,900 for the first 300

Early-bird ₹4,900 for the first 300 · No spam: one email at launch.

Ask us

A question, a hotel order, a visit to the workshop. Scrivici su WhatsApp.

The workshop

Dharamshala, Kangra, Himachal Pradesh

Chiama WhatsApp Notify me

Your basket

    How you will get it
    Pieces
    Totale

    You pay Dhauladhar Lantern Co. directly by UPI. Dhauladhar Lantern Co. confirms your order, usually within a day. If a piece can't be sent, your money for it comes back.